Salt trip in Oct

Little outing to the salt. Spoon crabs. Get down pretty quick, redfish seem to like them.

Why not?

Why not add content here? Blogging may be dead for the most part - but good fishing content is still needed. So from a wildnerness boundary creek in central Idaho teeming with cutthroat:

Saltwater tying

More gunnel work

Encapsulating the wood.

Aluminum strip and tape for a simple form so I can build up the epoxy to my required level. Mixed up wood flour, milled glass and baby powder to a thick paste and filleted in the corner for extra strength.

Now to knock it down with the sure form and sand smooth. It is hotter than h@ll here. Sanding is going to have to wait. This side is almost ready for glass.

So.... There were bumper guards on the rear corners and prow of the gunnels attached by bolts and rivets. Pulled the bolts and water gushed out. "This can't be good" So I cut into the bottom of the gunnels (I repaired the tops earlier but never hit the wood. The tops are a cap over an inner core) and this is what I found:

Major rot.

Ripped it out.

And cleaned it up (Not pictured, but I sanded out all the wood remnants and vacuumed it out). So worried, I also drilled a few holes into the transom to check for rot..... I didn't find any. The question now is to replace the rotten wood with new wood and a couple layers of glass, or pour in some 2 part foam, shape and glass?

It's Electric!

Bracket for electric starter found, acquired and installed. Next up, starter motor, solenoid and starter switch.

From the "He can be taught" department

In going from this:

with these:

to this: (5 hours with the power DA sander and 80 grit)

And this: (45 minutes with a sharp paint scraper and elbow grease)

It pays to note that that the old school way of elbow grease and a sharp scraper is 1o times faster than the power tool, despite my affinity for power tools.

Tarpon

Little L and I went tarpon fishing in Joao Pessoa (known as Jampa). Fishing was great! How many 7 year olds can claim to have caught a tarpon on a fly?

Flies:

Scenery:

Fish:

Had a couple like this, that either busted the line or the hook:

The Rio Paraiba is a first class tarpon fishery 15 minutes outside of a major metro area (that I had been visiting for the last 10 years without realizing there were tarpon).

Hotels and food are very affordable, as you are right in a big town there is great infrastructure and amenities (airports, hotels, restaurants, shopping, other activities) . If you are interested in fishing tarpon in Brazil, get a hold of me and I will put you in contact with a great guide.

Make it pretty.

Gunnels are pretty well done. I'll post more pics later. Now it is time to make it pretty. I pulled the motor off and put it on a stand I built:

You can just make out the ghost flames. Put it in water, made sure it was running, and deiced it will need a tune up shortly. Pulled the boat off of the trailer, and flipped it over (by myself). Had the wife help get it on the saw horses. Man it is ugly.

Spent 2 hours this morning sanding it. Under the black anti-foul paint is a couple dozen mollusks of some kind. Somebody in the past didn't clean it up. Just painted over it. Must have been kept in the water for a while.

Gunnel Repair

The gunnels on my new to me skiff have some weak spots. As I started on them with the grinder, I learned that the weakspots were a previous repair where some one had filled softspots with bondo. Bondo is not waterproof and promptly rotted.

I ground out all of the weakspots and filled them with epoxy thickened with wood flour and 1/4 inch fiber glass chop. I'll post a pic of the filled holes tomorrow or so. --EDITED TO ADD-- After the epoxy cured I knocked down the high spots with the sure form.

Epoxy filled with 1/4" chopped fiber does not go on real smooth, but it does go in very strong. I will have to fair this all out and clean it up. Tomorrow.

Back to blogging

Screw sharing all of my thoughts and pics on facebook it is back to my blog. As I am no longer in the mountains of ID and am still stuck in the flatlands of Texas perhaps the blog needs a new name? Too much work. What have I been up to? Some fly tying: A fall steelhead trip to the clearwater: Where I ate wild black berries. Some good mexican food. Saw some big fish in the hatchery, caught 0 steelheads, and almost slipped on the treacherous river bottom more time than I care to count. Been working on a drift boat build: And have been taking the boys fishing on the local rivers and down on the coast: For the next little while I will probably chronicle my boat building here, as my fishing days have been pared back from the halcyon days of Idaho. I'll try to update about weekly.

Time to start chronicling outings and boat builds...... Merry Christmas.

Been forever.

Went out fishing for red fish on the coast a couple weeks back. Got the goose egg.

But for your viewing pleasure.
Steelhead ;)

One in Winter from ryan peterson on Vimeo.

Dedication

Impossible catch of big brown trout in New Zealand from best flyfishing on Vimeo.

Teach you kid to fish

This youngster can cast pretty well..... oh yeah and he catches salmon to boot.

Man this guy can cast

Tossing the whole line.

I need to go do this

3-4 hours from home.

BULLS ON TOP from SHALLOW WATER EXPEDITIONS on Vimeo.

Saw this on the chum.

The Fish is Mine from Cuby on Vimeo.

Occupy this!

Blogging Slacker

Been slacking hardcore on my various blogs. Reviewed some of my family blog posts and got all nostalgic.

Went fishing on the Guadalupe over the weekend. Got to the river late. Tried the section right below the dam. Too much slack water for trout. Might be good for bass. Headed downstream to Rio Rafts. Still seems to be the best stretch for wade access. I might have to float fish this river one of these days.

It is a fishing fix, but Idaho it aint.

I will try to edit together the 2011 steelhead outing movie sooner or later and get it posted.